7Stax Lab Results: Where to Find Each Batch COA and How to Read It - 7Stax

7Stax Lab Results: Where to Find Each Batch COA and How to Read It

7Stax lab results are posted as certificates of analysis (COAs) in the 7Stax Lab Reports portal, grouped by product and strength. To use one, match its batch or lot number to the number printed on your pack. A COA is also where you find the two numbers that the threshold tests in DEA's October 14, 2026 notice in the Federal Register rely on, and this post works through those tests with a made-up example.

Where to find 7Stax lab results

Open "Lab Reports" from the main 7Stax site menu. The portal opens in your browser with folders by product and strength, and files can take a moment to load.

If a folder looks empty or you cannot find your batch, email support@7stax.com with the lot number. Do not rely on another batch's report in its place.

What a COA reports

A COA is a lab report for one batch. Read beside the label, it shows whether the label figure matches what the lab measured. A complete report includes:

  • Laboratory details: name, address and any ISO/IEC 17025 accreditation number (the international standard for testing laboratory competence).
  • Sample details: brand, product, format and batch or lot number.
  • Method: usually HPLC or UPLC for alkaloids.
  • Results: each analyte with units, limits and a pass or fail where one applies.
  • Sensitivity: the limit of detection (LOD) and limit of quantification (LOQ).
  • Sign-off: analysis date, issue date and signature.

Our guide on how to read a certificate of analysis walks through each section in more detail.

Alkaloid results and units

The alkaloid section lists results for compounds such as mitragynine and 7-hydroxymitragynine (7-OH). Results are usually given in milligrams per gram, milligrams per unit, or as a percentage. Check the unit before comparing anything:

Reported as How to read it Example
mg per gram Multiply by the unit's weight in grams to get mg per unit 0.5 mg per gram in a 2 gram tablet is 1 mg per tablet
Percentage 0.1% is the same as 1 mg per gram 0.05% is 0.5 mg per gram
Less than LOQ or ND Below what the method can measure or detect, so no number is given "ND" means not detected

Our guide to kratom alkaloids explains how these compounds relate to each other.

A COA lists only what the lab was asked to test. As of October 21, 2026, MGPI, MGM-15 and MGM-16 are temporarily in Schedule I under DEA's August 26, 2026 order, as DEA's October 14, 2026 notice on MGM-15 and MGM-16 sets out. If those three are not on the panel, the report says nothing about them.

Our post Does 7Stax Have MGM-15? explains what to look for on a panel.

The two threshold tests in DEA's October 14 notice

As of October 21, 2026, DEA's notice of intent on 7-OH and MGPI is not in effect, and the order it describes can publish on or after November 13, 2026. The notice uses two tests, and a product is caught if either one applies:

  1. Content test. The product's 7-OH and MGPI content, alone or combined, is more than 1 mg per gram in a solid or more than 1 mg per milliliter in a liquid.
  2. Ratio test. The mass of mitragynine divided by the mass of 7-OH (or of 7-OH plus MGPI) is less than 100.

Mitragynine and kratom leaf are not federally scheduled, according to the same Federal Register notice. Whether a given mitragynine (MIT) product falls inside the thresholds depends on its tested 7-OH content and its mitragynine to 7-OH ratio, which are read from the batch COA.

A worked example (illustration only)

The numbers below are made-up round figures chosen to show the arithmetic. They do not describe any 7Stax product, batch or COA.

Made-up figure Example A Example B
Tablet weight 2,000 mg (2 grams) 2,000 mg (2 grams)
Mitragynine 150 mg 150 mg
7-OH 1 mg 3 mg
MGPI Not detected Not detected
Content test 1 mg divided by 2 grams is 0.5 mg per gram, not more than 1, so not caught 3 mg divided by 2 grams is 1.5 mg per gram, more than 1, so caught
Ratio test 150 divided by 1 is 150, which is 100 or more, so not caught 150 divided by 3 is 50, which is less than 100, so caught
Outcome Neither test catches it Both tests catch it

One test is enough to catch a product under the notice's thresholds, and if MGPI is detected, it is added to the 7-OH figure for both tests.

This arithmetic shows how the tests work. It is not a legal opinion on any product, and our counsel confirms which 7Stax batches stay on sale. Our post on what MIT tablets are describes the Nano Tech line.

Heavy metals and microbial screens

A full COA screens for four heavy metals (lead, cadmium, mercury and arsenic), reported in parts per million or per billion against a limit. A microbial screen checks for yeast and mold, total aerobic count, E. coli, Salmonella and Staphylococcus aureus. Residual solvent results may also appear.

Each line should show a result, a limit and a pass or fail. If a section is missing, the report does not cover it.

How to match a COA to your batch number

  1. Find the batch or lot number printed on your pack.
  2. Open the portal folder for your product and strength.
  3. Find the report with the same batch or lot number and product name.
  4. Check that the flavor and format on the report match your pack.
  5. Note the analysis date, and confirm the report belongs to the batch you hold.

Independent testing as a cross-check

Some publications buy products and post their own lab results. Those results apply only to the single sample tested, so compare the batch and date before drawing any conclusion.

They are a cross-check, not a replacement for the batch COA. Our post on why third-party testing matters more than brand claims covers what an honest report should include.

Federal and state status, as of October 21, 2026

Federal

As of October 21, 2026, the 7-OH order described in DEA's October 14 notice is not in effect and can publish on or after November 13, 2026. What it means for 7Stax 7-OH products is set out in our update on 7-OH.

State

DEA's state summary in the same notice lists ten states that prohibit 7-OH: Alabama, Arkansas, Connecticut, Indiana, Kansas, Louisiana, Massachusetts, Tennessee, Vermont and Wisconsin. State rules change often, so check your own state's current law. This page is general information, not legal advice.

Frequently asked questions

What does "ND" mean on a COA?

ND means not detected: the compound was below the method's limit of detection. It does not prove the compound is absent, only that any amount was below what the test could find.

My batch is not in the portal. What should I do?

Email support@7stax.com with the lot number before relying on any other batch's report.

Does a COA show whether a batch falls inside the October 14 thresholds?

A COA shows the 7-OH, MGPI and mitragynine results that the tests in DEA's October 14 notice use, so you can run the arithmetic above. It is not a legal ruling on the product, and our counsel confirms which 7Stax batches stay on sale.

Why are some compounds missing from a report?

A COA lists only the compounds the lab was asked to test. If a compound is not on the panel, the report says nothing about it either way.

Sources

Back to blog